 |
 |
Home
> SignStream > SS-ICC1-232 > Installation
| [ |
ICC1-232 Display Controller |
] |
AC Power Test
- Insert DC power supply plug into 12 VDC jack.
- Plug power adaptor into AC wall outlet.
- The Net LED should turn on and stay lit.
RF Coax and iCC-Net Operation
- Connect the display to CATV and observe quality of RF broadcasting. A low-quality CATV system can also affect performance of the iCC-Net commands. If needed, fix CATV problems before installing the system.
- Connect the CATV RF Coax cable into the RF In input on the iCC1-232.
- If the iCC-Net signal is operating, the Net LED will blink once per second.
- Connect the RF loop cable from the RF Out jack to the TV’s RF connector (remember, you lose less than 1.5 dbmV by going through the ICC1-232’S internal RF tap).
RS-232 Control Codes
The ICC1-232 has a database of RS-232 control codes onboard. For iC C0mmander and custom applications, set commands as shown in the ICC1-232 Manual. For SignStream and iC-Web installations, set the control code in the software's Define Display or Room section.
Code |
MFG |
Type |
Kbd |
Models |
Notes |
Ver |
1 |
Sharp |
VP |
9.6 |
XG-E1200U |
Added S-Video, RGB2 |
3.8 |
2 |
Sharp |
VP |
|
PG-D100 |
Wired IR, factory option |
1.9 |
3 |
Eiki
Proxima
Sanyo |
VP |
19.2 |
Most models
LS1, DP5950, DP9250
Most models |
Video=3 |
1.9 |
4 |
Elmo |
VP |
|
EDP-2100, not recommended |
|
1.9 |
5 |
Elmo |
VP |
|
EDP-3100, not recommended |
|
1.9 |
6 |
Panasonic |
VP/PDP |
9.6 |
Most models |
|
1.9 |
7 |
CR |
--- |
9.6 |
Special Applications |
|
1.9 |
8 |
Electrohome |
VP |
4.8 |
VP EPS1024, RTS/CTS |
|
1.9 |
9 |
Mitsubishi |
VP |
9.6 |
Most models |
|
1.9 |
10 |
Fujitsu |
PDP |
4.8 |
Most models |
|
1.9 |
11 |
Fujitsu |
PDP |
9.6 |
Not recommended |
|
1.9 |
12 |
NEC
RCA |
PDP |
9.6 |
Most models
PSP42300 |
|
1.9 |
13 |
Pioneer |
PDP |
4.8 |
Most models |
Single unit |
1.9 |
14 |
Photonics |
PDP |
|
|
|
2.0 |
15 |
NEC |
VP |
38.4 |
HT/GT/LT/MT series |
Also 26 (19.2) |
2.8 |
16 |
Sony |
VP |
38.4 |
Most models |
|
3.2 |
17 |
Sampo
NetTV
Gateway
ViewSonic |
PDP/VP
TV |
9.6 |
Most models |
|
2.8 |
18 |
Samsung |
PDP |
19.2 |
Most models |
ID=0 |
3.1 |
19 |
Pioneer 2 |
PDP |
4.8 |
PDP-503,PDP-433 |
All units |
3.1 |
20 |
Eiki
Sanyo |
VP |
19.2 |
NB series
SU series |
Video=2 |
3.3 |
21 |
Zenith/LG |
LCD |
115.2 |
Most models |
|
3.4 |
22 |
Hitachi
Dukane |
VP |
19.2 |
Most models
Most models |
|
3.5 |
23 |
Sony |
PDP |
9.6 |
Most models |
|
3.6 |
24 |
Epson |
VP |
9.6 |
Models 30-820, S1 |
RGB=11 |
3.7 |
25 |
Epson 2 |
VP |
9.6 |
Models 7800-9600 |
RGB=10 |
3.7 |
26 |
NEC 2 |
VP |
19.2 |
Most models |
Also 15 (38.4) |
3.7 |
27 |
Samsung 2 |
LCD |
9.6 |
323/423 |
ID=All |
3.8 |
28 |
Samsung 3 |
PDP |
19.2 |
Most models |
ID=All |
3.8 |
29 |
Zenith/LG2 |
LCD |
9.6 |
9600 baud |
|
4.2 |
30 |
NEC LCD |
LCD |
9.6 |
Mitsubishi-series LCDs |
|
4.3 |
|
 |
 |
|
|
 |