ICC2-ATSC+ HDTV Tuner/RS-232 Controller
Overview | Specifications | Installation
Documents | Data Sheet | Manual | Drawing | Rack Mounts
AutoCad | ICC2-ATSC+
Specifications
Physical
Size (WHD): 8.5” [216mm] wide x 2.0” [51mm] height (1.5 RU) x 8.0” [203mm] deepWeight: 1.94 lbs [890 g]
Enclosure: Steel with black powder coat paint
Mounting: 2/1.5RU Rack mounting for one or two units side-by-side optional (RK1/2-HD+, RK2S-HD+)
Certification: ROHS compliant, meets California codes
Front Panel

Display: Red LED Channel Display, dot separated major and minor channel numbers, dot at end indicates Off-Air tuning
IR: IR sensor
Control: Power , Menu, and Select buttons, navigation using Up and Down (Channel Up and Down) buttons
Left and Right (Volume Up and Down) buttons
LEDs: NET (Green) RS-232 RX (Yellow), RS-232 TX (Red)
Rear Panel
RF In: 1 'F', female, 75 ohm impedance, recieves RF feed
RF Out: 1 'F', female, 75 ohm impedance, outputs RF to Air/Cable
Air/Cable: 1 'F', female, 75 ohm impedance, recieves RF from RF Out
AV Output: Simultaneous HDMI, RGB/Component, and video out - switchable RGB/Component.
Simultaneous HDMI (PCM), digital coax and optical (AC-3 or PCM), stereo audio.
Video Out: RCA composite video output, 1V p-p at 75 ohm impedance
Simultaneous 480i
Component Out: 3 RCA Y, Pr, Pb outputs (1080i/720p/480p/480i)
Digital Audio S/PDIF: Coax and TOSlink optical output, Dolby 5.1/PCM
Analog Audio Out: Stereo RCA audio, Mono, Stereo, or SAP, variable level
RGB Out: VGA RGBHV DB-15 female (1080i/720p/480p)
HDMI: HDMI receptacle, Type A, HD video and digital audio (in PCM mode), version 1.2 (1080i/720p/480p), HDCP
RS-232 Control: DB-9 male, RS-232 data link to control display or projector, 1200-115,000 baud
A/C (Air/Cable): 3.5 mm closure output to operate the optional RF-AB RF Switch
IR In: 3.5 mm stereo input for external IR sensor or wired IR (no carrier, discrete codes available)
Power In: 2.1mm coaxial jack (inside center conductor positive)
1 A maximum, 11.5 to 15 VDC, 12 VDC typical
Tuning
Frequency Range: NTSC, ATSC (8-VSB) and Clear QAM (cable) television 55.25 to 801.25 MHz
DTV Resolution: ATSC/QAM 1080i/720p/480p/480i
Tuning: Off-air 14-69 (NTSC and 8-VSB) and CATV 1-135 (Analog, 64QAM, 256QAM, 8-VSB)
Aspect Ratio: 4:3, 16:9 (Digital), 4:3, 16:9, Zoom (Analog channels)
Captioning: DTV and analog, set by program or customized for size, font and display attributes
Lock: Parental option for channels and/or rating
Captioning
On-Screen: Displays on-screen analog and digital captioning on all video ports.
Captioning Data: HDMI, RGB, and Component ports don’t have the ability to carry captioning data.
The composite video port will carry Line 21 data, but only when tuned to an analog channel
Includes
![]() |
PS12-1.5 Switching power supply, 1.5A 12 VDC, compact enclosure fits into power strips, 2.5" H x 2" W x 1" D
Options
HD2-RC HD Tuner Remote, at least one per system
IR-RXC External IR Receiver
RK1-HD Single Rack Kit, 2RU
RK2-HD Dual Rack Kit, 2RU
CC-232 RS-232 Custom Cable
CC-COM RS-232 Null Modem Cable
![]() |
© 2012 Contemporary Research Corporation.
Contemporary Research® is a registered trademark of Contemporary Research Corporation. All rights reserved.




