[

ICC-PSC Philips SmartCard

]

Specifications

Models

ICC1-PSC2: Philips Smart Card 2, 1-way coax, low-profile cover plate
ICC2-PSC2: Philips Smart Card 2, 2-way coax, low-profile cover plate

ICC1-PSC: Older Philips Smart Card, 1-way coax, Philips "P" series TV
ICC2-PSC: Older Philips Smart Card, 2-way coax, Philips "P" series TV
ICC2-PSC/AV: Older Philips Smart Card, 2-way coax, A/V inputs, Philips "P" series TV


Philips TVs and Plasma Displays

Previous models of Philips SmartCard TVs use the ICC-PSC series card with the large cover plate.
Newer models of Philips SmartCard TVs and Plasma iCONN interfaces accept the lower-profile cover plate of the ICC-PSC series cards. AV inputs are not required for ICC-PSC2 cards, all inputs are included with the TV.
In 2005, new Philips iTV Flat-Panel Displays include a SmartPort, which requires the ICC-P Smart TV Controller.
Visit the Philips web site for additional information regarding current available models, www.bds.philips.com.

Physical

Smart Card: 3.765" [95.63mm] wide x 5.585" [141.86mm] deep
PSC Cover Plate: 4.53" [115mm] wide x 3.41" [87mm] height x .58" [14.73mm] deep
PSC2 Cover Plate: 4.93" [125mm] wide x 2.41" [61mm] height x .58" [14.73mm] deep
Weight: 6 oz [170g]
Enclosure: All aluminum with durable black powder coat paint
Mounting: Inserts into slot of Philips TVs, replaces card included with TV

Front Panel Status

Net LED: Green LED for iC-Net bus, flashes once per second if receiving communication
TV LED: Yellow LED stays on, flashes when receiving IR data, off when Smart data connection is not active

Connections

Ant/Cable: 'F', female, 75 ohm impedance, RF from CATV system
iCC-Net: Carried over the same RF coax connection as TV channels
  Receive: Mid-band VHF, 74.7MHz, sent from IC Head-End Network Controller
  -25 to +35 dBmV signal level
  Transmit: Sub-band, 5.6MHz sent to Head-End Network Controller
  +/- 80 KHz max carrier deviation, +49dBmV nominal (ICC2 models only)
  AV Inputs(AV models): S-Video and mono audio RCA, composite RCA and mono audio RCA
RF Out: Internal RCA female, 75 ohm impedance, RF to TV
Ground: Internal lug for TV GND wire
Power: Powered by TV

Includes

PSC Smart Card
Cover plate
F to RCA adapter (PSC2 only)
2 RCA RF cables, one short, one long

Options

IC-RC Wireless IR Remote for user control and system setup
Internal buzzer used for system-activated alerts